DN250耐油NBR橡胶避震喉“主要耐液压油”

来源:http://www.songjiangdalian.com/ 作者:上海淞江集团 时间:2019-09-11 16:20
淞江集团为液压油管道提供耐油橡胶接头产品,采用丁腈橡胶N41生产,其中含量就达到50%左右。淞江集团为众多大型液压设备提供耐油橡胶接头,本文章为大家介绍的是DN250耐油橡胶接头,主要耐液压油,例如45号抗磨液压油等。
The official website of Shanghai Meijiang Shock Absorber Group Co., Ltd. [NBR] DN250 Oil-Resistant Rubber Joints "Major Oil Resistant" information. Meijiang Group provides oil-resistant Rubber Joints for hydraulic oil pipelines, which are manufactured with N41, and the content is about 50%. Meijiang Group provides oil-resistant rubber joints for many large-scale hydraulic equipments. This article introduces DN250 oil-resistant rubber joints, mainly hydraulic oil, such as No. 45 anti-wear hydraulic oil.

【NBR】DN250耐油橡胶接头“主要耐液压油”

【NBR】DN250耐油橡胶接头“主要耐液压油”

【NBR】DN250耐油橡胶接头“主要耐液压油”

【NBR】DN250耐油橡胶接头“主要耐液压油”

【NBR】DN250耐油橡胶接头“主要耐液压油”

说明:
我公司耐高温橡胶接头阀体上刻有上海松夏字样,松夏是上海淞江减震器集团有限公司旗下高端品牌,我公司所有特殊橡胶接头阀体上都刻有上海松夏字样(25kg、耐油、耐酸碱、耐高温、耐磨、双球、异径),如果产品上没有刻上海松夏字样的产品不是特殊产品,阀体上刻有上海淞江减震器集团有限公司字样的产品都是16kg过水产品,并非特殊产品。相关证明:松夏与淞江集团关系证明
Explain:
Our company's high-temperature rubber joint valve body engraved with Shanghai Songxia, Songxia is a high-end brand of Shanghai Songjiang Shock Absorber Group Co., Ltd. All our company's special rubber joint valve body engraved with Shanghai Songxia (25kg, oil, acid and alkali resistance, high temperature resistance, wear resistance, double ball, different diameter), if the product does not have The products engraved with Shanghai Songxia characters are not special products. The products engraved with Shanghai Songjiang Shock Absorber Group Co., Ltd. on the valve body are all 16KG aquatic products, not special products.

名称:耐油橡胶接头
型号:KXT-NBR-250
口径:DN250
压力:1.6Mpa
长度:230mm
轴向压缩:25mm
轴向拉伸:14mm
横向位移:15mm
偏向角度:15°
橡胶材质:丁腈橡胶N41
法兰材质:碳钢 / 球墨QT450
法兰标准:GB/T 9119-2000 (除此法兰标准之外,我厂还可以配套更多法兰标准,如需了解其他法兰标准请点击:橡胶接头法兰标准
适用介质:液压油、润滑油、乳化液;(注明:航空煤油、柴油、汽油,不能用,要选择四氟橡胶接头才可以使用
使用优点:减震、降噪、保护液压设备的长期使用,降低维修成本。
质保期限:12个月
生产厂家:上海淞江减震器集团有限公司
资质证书:合格证、质保书、检验报告、橡胶接头行业TS压力管道生产许可证、国家型式试验报告、第三方性能检测报告、含量成分检测报告。
Name: oil resistant rubber joint
Model: KXT-NBR-250
Caliber: DN250
Pressure: 1.6Mpa
Length: 230mm
Axial compression: 25mm
Axial tension: 14mm
Lateral displacement: 15mm
Deviation angle: 15 degrees.
Rubber material: nitrile rubber N41
Flange material: carbon steel / spheroidal graphite QT450
Flange standard: GB/T 9119-2000
Applicable media: hydraulic oil, lubricating oil, emulsion; (Note: aviation kerosene, diesel, gasoline, can not be used.)
Advantages: shock absorption, noise reduction, protection of hydraulic equipment for long-term use, reduce maintenance costs.
Warranty period: 12 months.
Manufacturer: Shanghai Songjiang shock absorber Group Co., Ltd.
Qualification Certificate: Qualification Certificate, Quality Guarantee, Inspection Report, TS Pressure Pipeline Production License of Rubber Joint Industry, National Type Test Report, Third Party Performance Test Report, Content Component Test Report.


以下是淞江集团介绍:
The following is the introduction of Songjiang group









相关链接:橡胶接头案例 
Related links
本文首发地址:http://www.songjiangdalian.com/358.html